Видео

It would have been interesting to see the actual damage inside of that pop up camper you used as your example.

What are your thoughts on the folks that have painted their roofs with the Henry’s silicone product?

Not true. They have a button for a reason

Thank you Nick for your video and your expertise. Gotta love the "It works for me" idiots, who are trying to tell you that your wrong.

I’m replacing the tank vent covers on my Intech ovr expedition and I have an aluminum roof. What do you recommend I use for the sealant? Thanks

Rv's are a rip off. You don't get what you pay for. I would never buy a new one.

Great video! Thanks for sharing. I 100% agree. Eternabond has its place as a patch but not as a permanent fix. Geeze!

Problem is you have alot of RV channels promoting it. RV Tips & Travels did a full roof eternabond 3 years ago and just did a review video 3 months ago. Alot of newer RVers see these videos and follow along.

Hey Nick! Sent ya a text for an estimate on a reseal. Lemme know buddy!

I 100% agree. Of course if the internet says it’s good, clearly you must be wrong. 😂. Like the guy above, oh it’s great. I’ve never had a problem! --- YET! As a buyer of a used Rv, I stayed away from “Eternabonded” roofs for a simple reason…what are they hiding?? Of course, I too don’t want to remove that crap. But, I’d say EVENTUALLY it will be an issue. So, just do your inspections and leave the tape for emergencies.

Thanks for the video! Interesting points for sure. It’s always good to hear others perspective. I definitely respect your opinion and knowledge but I personally don’t think that properly applied Eternabond tape is any worse than Dicor sealant. I’m constantly shocked that product is still used. Dicor is a really bad product in my opinion. I’ve never seen it last more than a few years (I’m in Texas) whereas properly applied Eternabond will go 5 years plus without issue (again this is in Texas). Also the seal tape that Jayco used on the top of my slides definitely isn’t Eternabond but some cheap alternative. I would be willing to bet other manufacturers are also not using Eternabond on top of the slides but some cheaper version. Not saying it’s perfect or even better than a quality sealant. But I do wholeheartedly believe it is a better option than Dicor in certain situations, mainly at corners and not around curves.

Great video. Looking forward to more of the same.

Thanks Nick.

Are there questions we can ask when we go to purchase an RV/camper/anything that has water lines in it? If you've done a video on this can you direct me? TY😊

I realize this isn't the forum for this question - but I'm just wondering, why this isn't true for mobile homes as well - or maybe this has changed in the last 20 years or so? Greatly appreciate your channel sir!

my current tank install has a shut off valve to connect the hot and cold if bypassing the watertank... doesn'tlook like you installed this? Is this not needed?

Great easy video on the swap. I am about to change out from a dometic tanked 6 gallon to a tankless on our 2011 newmar bay star 2901 motorhome .Will be much easier for me as I have storage bays down both sides to run my wires up high and I will just run plastic clamps over to my inside bath wall, drill a hole up from the floor plate so I can mount my controller on the wall that my door is mounted to

Thank you, very good explanation

Too bad the factory doesn't do a comparable check BEFORE they ship it to you!

Where are the links? I am looking for the Seal Driver Ideally a single one for a 7k axle Double Lip Grease Seal (Hub bore diameter: 3.371" Spindle diameter: 2-1/4")

Excellent video. I have watched all the other YT videos on this subject but yours was by far the best. Great tip on the plumber's grease too! I have the Bristol on my 2021 Jayco Eagle HT fifthwheel but NOWHERE could I find the part #, only the patent #. This made it very difficult to order another valve.

Picking up my new trailer tomorrow. Had a walk through and found issues and asked for a new trailer and got it. Now we are going through getting the new one tomorrow. At our last one there was no water. I wanted the hot water heater to be turned on and working and to run water but they acted like I was crazy. Well tomorrow will be a new kind of crazy. If I find major things wrong again, or they will not do these things I am walking away.

Thanks for answering my question.

I have a thankless water heater, doesn't appreciate me at all.

We need to do our roof bad! We noticed the roof membrane had a gap right where the roof gutter meets. making a huge gap for water that came in! How do you fix that? Just Roof sealant? 😮

Yeah, unfortunately this didn't work for me. Brand new tankless water heater in a brand new RV. Doesn't heat up water in the shower, but it does heat up in the bathroom and kitchen sinks. Output stays around 85, even goes down and back up.

Nick, great job! I noticed some crease on the outside of metal wheel. What's up with this? Maybe leaking out from cap?

Thanks Nick. Great video. I just took Lippert RV owner school training last month and one class was on this and we actually did a repack. This will be a nice refresher video for when I tackle my first repack job next spring on my Fifth wheel. You were spot on with this. Aprreciate your video.

Thanks for the detailed video. Saves me lots of money on maintenance fees.

Excellent video and very thorough..

Thanks Nick. Great video. I have been thinking about repacking or replacing mine recently. You just helped me make the decision.

Great video. hope you do one on replacing brakes.

I'm having an issue with mine. I have my control panel set to 110, but the output goes way beyond that 115-127. It'll shut off when I turn the cold side on, but then I'd have to turn the cold side off when it gets too cold. I constantly have to repeat that daily

My panel has a separate winterize Sanitize hose connection. People are telling me that if I just use that I'm not winterizing my tankless water heater

What a great video! I took away a few things from it. I was shocked to see that there is VERY LITTLE grease between the outer and inner bearing. That bearing driver is a great tool. I have one. Also as far as the unopened wheel bearing packer goes, my protip is to put it in a vise to squeeze it gently if needed. I usually use the CPR position on the floor to do them. Shouldn't one flush the "quick lube" fitting orifice before reinstalling the bearings? There might be blue grease or worse yet, dirty grease. Slip joint pliers can remove the grease cap by rocking gently too. Again! Thanks you for a great video from Nick's continuing RV education :-) Happy that the lucas grease is approved by Dexter. Rock on!

Sooooo where did you get the orange key? Why is it hard to get a hold of.?

Do you have information on effective ways to lock/secure our RV's?

Thanks Nick, great video. It sucks that the dealers charge $200 plus an hour, but the going rate for RV techs is $25.00 per hour.

🚐 Great content! For those who can’t get enough of RV parts and accessories, we’ve just released a new video showcasing the best picks for your next adventure. Discover top-rated gear and innovative upgrades that will make your RV experience even better! 🌟

Great video. Very helpful.

You are incorrect in your instructions, at least you didnt fully explain how to use the endless water heater. You set the temp controller to the hottest setting you want for the hottest demand. Washing dishes probably require hotter water than washing hands or taking a shower. If it’s set to 124 (in this video) to be the desired temp to wash dishes (no cold water would be added), taking a shower may require a (SLIGHT) crack of the cold water to get the desired temp….. adding cold water downstream of the heater (aka at the tap) would have ZERO effect on how hard the heater works! It’s only gonna work to get to 124 in this example. Now if people keep turning it up because they are adding cold water to reach the desired PRESSURE, thats a different topic. There is a learning curve to how tankless works but not thru misinformation.

So what’s the story with the orange Bauer. Howd you get one?

Amazing video, thank you so much for making this video. I pack my own bearings on my trailers but I learn some new things from this video. I’m saving this video in my favorites.

This was probably done by a diy guy who didn't make it very pretty. It still could be repaired by a diy guy with electrical skills who is more careful and tidy for a lot less than a dealer.

I would like to throw this in there.. I was using my tank flush feature on my 05 montana. I messed up and didn't get my tank valve open. and instead of coming out the roof like you mention at 4:30 it instead EXPLODED my grey tank (I had the black and grey tanks both open, but didn't have the valve at the hose connection open). Then I closed my grey tank, and immediately, the black tank exploded too! So I had to patch 2 tanks with steel mesh, a soldering iron, and abs glue made into a paste with abs shavings! Patch is holding strong 2 months later!

Awesome video...thanks for sharing!

Anxiety looking at the rats nest. Good video! I hope to join the tech ranks soon, but not sure A certified tech was needed to realize that that was not a certified installers work.

What is the minimum AC volt at the campground pedestal I don’t want to see so it won’t mess up my air conditioner on my Rv

awesome stuff..question, can you adjust the temp? seems on gas it runs and starts to drip out of the expansion valve. I then shut off, extremely hot? is this normal and should I liet it keep running? thank you in advance ...

Very poor installation. If you see something like this, run away quickly. What a junk installation for sure.